Laser Engraving Machine&Laser Cutting Machine Maintenance
Laser Engraving Machine&Laser Cutting Machine Maintenance
1. Feed into lube oil to linear guide on laser engraving machine and laser cutting machine. After using for a while on laser machine, the dust and fume could viciate linear guide. Turn off laser power, clean the linear guide with soft cloth, then feed into lube oil. Then move the axis to ensure oil get into the slider.Then mount on linear guide firslty, then mount on screw but no fixing. Keeping levelness, fix tape and slider, mount on lens, adjust the laser beam path on x direction.
2. Lens and Mirror Cleaness. After using for a while for laser engraving machine and laser cutting machine, the dust and fume will adhere to the lens and mirror surface. And this will affect laser engraving and cutting depth and accuracy. Usually per week, clean with absolute alcohol.
3. Feeding Oil To Bearing. For ensuring fine cutting and engraving result, some bearing need feeding oil regularly. Clean dust from bearing, feeding into oil by syringe needle slowly, and turn around bearing while feeding.
4. Belt Adjustment. If belt is too loose, the it cause overlapping appearance, if belt is too tight, then will cause belt wearing out. So after using for a while, please adjust the screw to belt to keep the belt with suitable level.
5. Laser Tube on laser engraving machine Maintenance. Suggest using distilled water to cool down laser tube. But after using for a perid, there will left limescale in the laser tube. T hen we could put some vinegar to take off limescale. Then clean the laser tube to last laser tube life.
2. Lens and Mirror Cleaness. After using for a while for laser engraving machine and laser cutting machine, the dust and fume will adhere to the lens and mirror surface. And this will affect laser engraving and cutting depth and accuracy. Usually per week, clean with absolute alcohol.
3. Feeding Oil To Bearing. For ensuring fine cutting and engraving result, some bearing need feeding oil regularly. Clean dust from bearing, feeding into oil by syringe needle slowly, and turn around bearing while feeding.
4. Belt Adjustment. If belt is too loose, the it cause overlapping appearance, if belt is too tight, then will cause belt wearing out. So after using for a while, please adjust the screw to belt to keep the belt with suitable level.
5. Laser Tube on laser engraving machine Maintenance. Suggest using distilled water to cool down laser tube. But after using for a perid, there will left limescale in the laser tube. T hen we could put some vinegar to take off limescale. Then clean the laser tube to last laser tube life.
没有评论:
发表评论