2012年6月3日星期日

How To Make Program on CNC Wood Router


How To Make Program on CNC Wood Router

cnc wood router

CNC Wood Router is rather popular in the morden instrument industry.
CNC wood router could allow woodworker to make out precise carving pieces quickly.  Such as violin makers, photo frame etc who need to produce a number of similar products.


There are several steps you need to do:
1. Input the dimension of work piece into the command console. X axis represents the length of the work-piece, Y is the width, and Z is the height.


2. Create the milling program. Enter the depth and direction of each cut as well as the number of passes required to reach the finished cut depth. Repeated shallow cuts reduce the risk of tear-out.


3.Select the router path and speed. The path and direction of each pass is best determined by the piece's final shape. Adjust the cutter speed on CNC wood router for the properties of the wood. Fine-grained hardwoods like maple burn quickly. Fast, light passes work well with this type of material. Open-grain hardwoods like oak dissipate heat rapidly. Slower, slightly heavier cuts can be made safely with these woods.


4.Save the program and test it with scrap wood on cnc wood router. Testing the initial program on a scrap piece allows you to correct mistakes in programming before you ruin an expensive piece of material.

没有评论:

发表评论