Acrylic Product Maintenance

With acrylic advanced features, acrylic ihas been used more and more widely. Well, acryclic i also with disadvantages, such as easily get scratched, this requires we should take good care of acrylic product.

Usually, acrylic product is with following advanced features:

1. Visual Effect: Multi-color, gorgeous, strong visual impact.

2. Weather-Resistance: Keep no fade for rather long time, even for 8-15 years.

3. Durability: Protect power supply within it, last power lifetime.

4. Reasonability: Reasonable design, rain and humidity-proof, easy to get maintenance because of its structure.

5. Attaching-Resistance: Its attaching-resistance capability is 200 times over glass.

6. Optical Transparency: could up 95%, save cost of power.

7. Burning-Resistance: no self buring.

How to handle maintance for acrylic?

1. Clean. Use clean water to clean and dry it with soft cloth.

2. Use polishing paste with soft cloth to make acrylic shinning.

3. If acrylic products are broken, use IPS glue etc to stick it.

4. Use poshing machine to polish it if surface is scratched or use laser engraving machine to engrave the surface again.

No Back To Origin For Laser Cutting Machine

What we can do if x and y axis does not go back to origin for laser cutting machine with RUIDA control system?

Turn on machine, press" ESC" on DSP screen of laser cutting machine, then move X axis manually on DSP screen, and touch limit sensor by hand, now see if light on mainboard is on. 
If not on, then use multi-meter to test the wire from limit sensor to mainboard to see is limit sensor broken or wire problem.
The circle is related with limit sensor of laser cutting machine. Those four points are light, from down to up position, port 1 and 4 should be on if you touch limit sensor by hand.

If one of two lights does not turn on, then please click FILE on software screen, then click VENDOR SETTING, make screen record, and send the photo to us by email. Then OMNI engineer will solve this problem of laser cutting machine for you according to this.

Laser Engraving Machine Problems And Solution

Laser Engraving Machine Problems And Solution

The reason of material surface is uneven or too shallow  after engraved by laser engraving machineand Solution:

1. Check the focus distance is ok or not

2. If there is wet paper on the processing material, check if the paper is too much or the water in the paper is too much;
3. Check if the laser tube is ageing
4. Confirm is laser beam path is right
5. The mirror is covered with dust too much
6. Mirror is broken
7. Laser tube head is dirty

Laser Engraving Machine&Laser Cutting Machine Maintenance

Laser Engraving Machine&Laser Cutting Machine Maintenance

Laser Engraving Machine&Laser Cutting Machine Maintenance

1. Feed into lube oil to linear guide on laser engraving machine and laser cutting machine. After using for a while on laser machine, the dust and fume could viciate linear guide. Turn off laser power, clean the linear guide with soft cloth, then feed into lube oil. Then move the axis to ensure oil get into the slider.Then mount on linear guide firslty, then mount on screw but no fixing. Keeping levelness, fix tape and slider, mount on lens, adjust the laser beam path on x direction.
2. Lens and Mirror Cleaness. After using for a while for laser engraving machine and laser cutting machine, the dust and fume will adhere to the lens and mirror surface. And this will affect laser engraving and cutting depth and accuracy. Usually per week, clean with absolute alcohol.
3. Feeding Oil To Bearing. For ensuring fine cutting and engraving result, some bearing need feeding oil regularly. Clean dust from bearing, feeding into oil by syringe needle slowly, and turn around bearing while feeding.
4. Belt Adjustment. If belt is too loose, the it cause overlapping appearance, if belt is too tight, then will cause belt wearing out. So after using for a while, please adjust the screw to belt to keep the belt with suitable level.
5. Laser Tube on laser engraving machine Maintenance. Suggest using distilled water to cool down laser tube. But after using for a perid, there will left limescale in the laser tube. T hen we could put some vinegar to take off limescale. Then clean the laser tube to last laser tube life.