Painting on Acrylic After Engraved by CNC Wood Router

Painting on Acrylic After Engraved by CNC Wood Router

The way of painting for back engraving on scotch acrylic.
It is easily to be back engraved for acrylic by cnc wood router. Then you may could use needle to inject the painting. It is easily to inject the painting to acrylic, the difficulty is to clean the painting out of engraving part. Usually you can use knife or gasoline to clean it, then make prima paint. 
If the acrylic will not use primer paint, then can not use knife to clean.

The way of panting for back engraving on colorful acrylic
Using back painting way, painting the primer paint to the backside, then use the self-adhensive label to stick, then engrave it. When the engraving job is completed by cnc wood router, paint the gold painting again. When the paint is dry, clean the self-adhensive label. This way could protect primer and gold paint very well.

CNC Wood Router Cut Acrylic Cashier Board and Breast Plate

Using cnc wood router cut acrylic for cashier board and breastplate is very easy and qucikly.

Firstly, you design the cashier board size and make tool path, choosing what cutter you use, then transfer the program file to the control system Usually the program file is with G code file.

Now you put the acrylic sheet on the working table, using clamps to fix it or using vacuum system to holding it down tightly. Then mount on the cutter. Move the cnc wood router spindle to the position you want to start processing. Now, cut starting.

It takes for a while, then partially finished product is coming.

Now take off the self-adhensive cover from acrylic, stick the gold paper with words on it. then done. The breast board is with double layer for acrylic.