Repair for converter motor on cnc wood router
1. It’s recommended that the bearings of the electric spindle on cnc wood router requiring replacement or other types of repairs should be returned to the manufacturer’s plant or submitted to the designated maintenance departments.
2. When self-replacement or dissembling is required, send for a specialized operator of cnc wood router, as well as use special dissembling tools. Forcible beating should be strictly prohibited to avoid the damage to parts.
3. During assembling, wash clean each part with highly graded gases to prevent the dirt from entering the shell and impacting the spindle’s precision and life, and blown it dry with clean compressed air.
4. Line the bearings in the consistent manner with the original ones, with both interior and exterior shock insulators in running-in. Press the bearing into the shaft and the shell, and the beating is strictly prohibited.
5. After the bearing is well fit, adjust the precision of the spindle radially, on its end face and in its inner hole, and make all its bounces less than 0.004 mm before putting into use.
6. For the partial or fatal damages due to the user’s own dissembling operation, the user should assume the costs in replacing or maintaining the part on cnc wood router. (For the demands in bearings, special greases, and so on, please feel free to contact our Company.)
1. It’s recommended that the bearings of the electric spindle on cnc wood router requiring replacement or other types of repairs should be returned to the manufacturer’s plant or submitted to the designated maintenance departments.
2. When self-replacement or dissembling is required, send for a specialized operator of cnc wood router, as well as use special dissembling tools. Forcible beating should be strictly prohibited to avoid the damage to parts.
3. During assembling, wash clean each part with highly graded gases to prevent the dirt from entering the shell and impacting the spindle’s precision and life, and blown it dry with clean compressed air.
4. Line the bearings in the consistent manner with the original ones, with both interior and exterior shock insulators in running-in. Press the bearing into the shaft and the shell, and the beating is strictly prohibited.
5. After the bearing is well fit, adjust the precision of the spindle radially, on its end face and in its inner hole, and make all its bounces less than 0.004 mm before putting into use.
6. For the partial or fatal damages due to the user’s own dissembling operation, the user should assume the costs in replacing or maintaining the part on cnc wood router. (For the demands in bearings, special greases, and so on, please feel free to contact our Company.)
没有评论:
发表评论