Fiber Laser Cutting Machine is the next big thing in the field of engraving. The use of Laser technology for engraving and curving out detailed structures isn't new; the market already consists of its highly efficient version. It delivers an impeccable quality of work in quick time, and is best for use on metallic surfaces like brass, copper, steel, titanium etc. The ultimate measure of work is the superb quality of the cut and the enduring tolerance level, which doesn't harm the material.
Efficient Features
Its high-quality work and superior precision depend on its inherent features. The fiber laser cutting machine has a good shelf life as it has the capacity to work for 100, 000 hours at 3000-watt power. The optional table shuttle optics system has various kinds of optical fibers – 50mm-200mm fibers used according to the nature of the material. There are various ways to control the gas pressure like the gas regulator, safety shroud etc. The most important features are the German drives powered to give high throughput results in a quick time.
Using Fiber Laser Cutter
It is indeed very easy to operate this machine. However, it involves certain risks as it cuts through materials at high speed. It can cause damage to both the materials and the workers. A detailed knowledge of the types of machine models and the materials used is essential. Be sure you choose the exact machine, which supports your material or try consulting the manufacturer for this purpose.
A trained individual should operate this after thoroughly reading the manual. Taking care of warranty, safety mechanisms, and other technical details are equally important. Moreover, various parts of the machines like nozzles, operators, press brakes, lens focusing system and material refilling systems need a routine checkup. When you satisfy yourself with all these checks and controls, it is now the time to start working on your Fiber laser cutter.
Thus operating a Fiber Laser Cutter is as simple as its cutting work – quick, precise andefficient, but it involves some risks. There is only one chance of correction, and once it is done, you can't revert to the original. So be careful and make the most of it.