Laser Cutting Machine Cut Paper

Using laser cutting machine and laser engraving machine could cut paper, paperboard such gretting card material quickly. 

OMNI laser cutting machine is cutting paper by un-touching working way, will not damage the paper surface. And OMNI laser cutting machine laser beam is with rather less size comparimg traditional cutting tool. So OMNI laser cutting machine is with rather high cutting precision, can make out fine greeting card.

When we cut paper, suggest using vacuum table on laser machine. In this way, the thin and software material could keep even for best cutting quality. If there is any question about laser cutting machine on paper cutting, kindly let me know.

Solution For No Laser Given Out

Solution For No Laser Given Out

Solution for No Laser Given OUT
When you use laser engraving machine, you may encountered the issue of no laser given out. There are 3 reasons for no laser given out.  1. Laser tube, 2. Laser power supply, 3. The wire between laser tube and power supply.
Exclusion method: 1. Find another wire to short connect with P and G port. If laser comes out, then it means laser power supply and laser tube can work, the wire connection is with problem.
2 Find laser power supply, pull off its signal terminal, like the below photothen press TEST, connect the cathode clip to the casing to see if there is fire comes out. If there is, then it means that the laser power supply can work, if not, then it means that the power supply is with problem. 
3 Check if the wire between laser power supply and cathode/anode of laser tube, to see if burnt.
4If you press TEST key, it is with laser given out, while no laser given out when engraving, then measure the voltage of Y2 terminal on the control card when the machine is engraving.

  If laser given out normally, voltage between G and IN is 0-5v, H(high level) is with different voltage according to the different power
Voltage is from a few tenth of voltage between G and L  L(low level)              
      If no laser given out, the voltage between G and IN is 0V   L(low level)
       Voltage between G and L is 5V      H(high Level)
Please be sure there is configuration program( file) in the machine, and no fault of power configuration and software.
Pull off signal wire between laser power supply and control card(Y2 terminal on control card), connect the red cathode with casing, then short connect LPG on the power supply, turn on machine, to see if the red cathode can be on fire. If there is fire, then it means power supply can work, it is laser tube with the problem.  
Turn off machine, connect the cathode of laser tube with casing, turn on machine, press TEST key, see if there is fire out from cathode. 
Check Laser power supply instruction:
when the laser power supply is under standby condition, press TEST, LASER lamp is lighting, there is laser from laser tube; if the LASER lamp is not lighting, then laser power supply is broken; if LASER lamp is on, no laser from laser tube, then the laser tube is with problem.

Laser Engraving Machine&Laser Cutting Machine Maintenance

Laser Engraving Machine&Laser Cutting Machine Maintenance

Laser Engraving Machine&Laser Cutting Machine Maintenance

1. Feed into lube oil to linear guide on laser engraving machine and laser cutting machine. After using for a while on laser machine, the dust and fume could viciate linear guide. Turn off laser power, clean the linear guide with soft cloth, then feed into lube oil. Then move the axis to ensure oil get into the slider.Then mount on linear guide firslty, then mount on screw but no fixing. Keeping levelness, fix tape and slider, mount on lens, adjust the laser beam path on x direction.
2. Lens and Mirror Cleaness. After using for a while for laser engraving machine and laser cutting machine, the dust and fume will adhere to the lens and mirror surface. And this will affect laser engraving and cutting depth and accuracy. Usually per week, clean with absolute alcohol.
3. Feeding Oil To Bearing. For ensuring fine cutting and engraving result, some bearing need feeding oil regularly. Clean dust from bearing, feeding into oil by syringe needle slowly, and turn around bearing while feeding.
4. Belt Adjustment. If belt is too loose, the it cause overlapping appearance, if belt is too tight, then will cause belt wearing out. So after using for a while, please adjust the screw to belt to keep the belt with suitable level.
5. Laser Tube on laser engraving machine Maintenance. Suggest using distilled water to cool down laser tube. But after using for a perid, there will left limescale in the laser tube. T hen we could put some vinegar to take off limescale. Then clean the laser tube to last laser tube life.

China Laser Machine is Widely Used on Education

China Laser Machine is Widely Used on Education

Laser technology is more and more popular at school, university and other education units. Students use laser engraving machine and china laser machine to cut wood, the wood pieces after cutted could for all kinds of wooden mold, such as robot, constructive mold etc. Laser engraving machine and laser cutting machine's advantage are fast speed, easy operation and safety. 

We get feedback from teachers that students are interested in laser technology very much and enjoying study it.

Advantages of laser engraving machine and laser cutting for using at school.
Whatever operator's skill level, there always with not bad result. This could encourage those students with less capability on the operation. And students with higher skills could make out much excellent work.

Fast: Laser engraving machine and laser cutting machine is rather fast than saw etc traditional device.

Easy: Any age and any operation level students coudl operate it.

Saving Material: China laser engraving machine and laser cutting machine save material because its software could count the material size and find the right position of starting work.

Creativity: We all say that your design is only limited by your imagination. CNC laser encourage students to design any shape or any imagine they want.

Reducing mistake ratio: Before you starting working on laser, you can see the laser beaming working path on the PC, reducing the mistake in some degree.

Safety: Comparing other mechanical machines, laser machine is more safe. 
OMNI's China laser engraving machine and laser cutting machine is with safety sensor on the laser machine cover. In the process of laser working, if you open the laser machine cover, then the laser machine can sense it and stop the work at once. This is for ensuring operator from laser hurt.

Software acceptable: Laser machine software support jpg, plt, dxf, bmp file, very easy to transfer and input for realizing the work.

China Laser Machine

China Laser Machine

China Laser Machine could cut leather, fiber, textile, cotton, foam etc. Comparing with traditional cutting way, laser cutting machine is with following features:

1. Fine Engraving: The accuracy of laser engraving machine is with rather higher accuracy than cnc wood router bits. Its accuracy could up to 0.02mm. With laser engraving machine and laser cutting machine, we can work out rather beautiful words and imagine on leather. And this leather can be used in shoe, purse etc industry.

2. High Working Efficiency: Laser cutting machine and laser engraving machine is with high engraving speed, rather faster than traditional saw. 

3. Easy operation: laser engraing machine and laser cutting machine is just like laser printer. There is no much high requirement to operator, very easy to learn it and get starting.

4. Low cost. Unlimitless on the processing quantity. 
More questions about laser engraving machine or laser cutting machine, welcome to send us email.